Home / 3D Software for Reverse Engineering, Inspection and LiDAR in Malaysia / EXMeasure: 3D Inspection and Measurement Software in Malaysia

EXMeasure: 3D Inspection and Measurement Software in Malaysia

EXMeasure is SHINING 3D’s inspection software for working with scan and CAD data that you already have. It imports reference and measured models, aligns them, analyses deviation, dimensions and GD&T, and produces reports in one workflow. It does not scan directly; for scanner-integrated inspection, see SHINING3D Inspect. MAKE3D is the Official Distributor of SHINING 3D in Malaysia, so we can advise which of the two fits your workflow, set it up and support it. Send us your scan and CAD model and we will show the result.

3D measurement results on a scanner touchscreen
3D measurement results on a scanner touchscreen

What does EXMeasure do?

EXMeasure takes a CAD reference and a measured scan, aligns them and reports how far they differ. SHINING 3D lists these functions:

  • Import and projects: load reference and measurement models, and save projects.
  • Alignment: best-fit, transformation, manual and coordinate-system alignment, and a one-click best fit.
  • Full-field 3D comparison: colour maps with custom tolerance bands for pass or fail.
  • Feature construction: points, lines, planes, circles, spheres, cones and cylinders.
  • GD&T: datums and checks such as straightness, flatness, circularity, cylindricity, parallelism and perpendicularity.
  • Measurement: a virtual caliper for internal and external diameters, plus distances, angles, area and volume.
  • Reporting: snapshots, 3D views and tables, exported as PDF.

SHINING 3D states that its algorithms are certified by PTB (Gauss least squares and Chebyshev minimum area). This is non-contact 3D scanning inspection data analysis, so it suits parts that are slow to check with a gauge.

EXMeasure or SHINING3D Inspect?

Choose EXMeasure when scanning happens in other software and you need alignment, comparison, GD&T and a PDF report. Choose SHINING3D Inspect when you want inspection tied to the scanner, with application modules, templates and automation. SHINING 3D states that EXMeasure does not support direct scanning and omits several Inspect functions. The table sets out the differences.

CapabilityEXMeasureSHINING3D Inspect
Direct scanning with a scannerNoIntegrated into FreeScan software
Full-field colour deviation, alignmentYesYes
GD&T checksYes (datums, form and orientation checks)Yes (ISO and ASME, including position and runout)
Application modules (dent, sheet metal)NoYes
Project templates and CSV report exportNoYes
On-device and automated deploymentNoYes (FreeScan Omni, automated systems)
Report outputPDF exportCustomisable reports and templates

Licence and availability

Standalone licences are sold separately, and SHINING 3D states there is no free trial for EXMeasure. Ask us how EXMeasure would be quoted for your scanner and workflow, and we will confirm the licence terms, installation and training before you decide. For scan-to-CAD modelling rather than inspection, see EXModel. Part of the 3D software range.

Equipment

Scanners for measurement work

Which scanners pair with it?

Because EXMeasure works on existing data, the scanner is your choice. We supply the FreeScan Omni, Trak Nova, Trio and UE Pro 2 for inspection work, and the EinScan Trak is the model SHINING 3D names for the bundled licence. Tell us your parts and tolerances and we will advise the scanner and the software together.

Why MAKE3D

  • Scanner, software and local support from one supplier.
  • Demo on your own scan and CAD model.
  • Inspection service available if you do not want to run it in-house.

Tell us what you measure, how you scan it today and the report you need. We will recommend EXMeasure or Inspect and show the workflow on your own data.

Frequently Asked Questions

EXMeasure is SHINING 3D’s inspection and measurement software. It aligns a scan with a CAD model, analyses deviation, dimensions and GD&T, and exports a PDF report. It works on scan and CAD data you already have, and it does not control a scanner.

Inspect is the full package, integrated with FreeScan scanners and adding dent and sheet-metal modules, project templates and CSV report export. EXMeasure covers alignment, comparison, GD&T and PDF reports on existing data, without direct scanning. Tell us your workflow and we will recommend one.

Yes. It supports datums and checks including straightness, flatness, circularity, cylindricity, parallelism and perpendicularity, plus a virtual caliper for diameters, distances and angles. For position and runout, ISO and ASME switching and application modules, use SHINING3D Inspect instead.

SHINING 3D states that EXMeasure does not currently offer a free trial, though promotions may vary by product. If you want to try an inspection workflow first, ask us for a demo on your own scan and CAD model, or look at SHINING3D Inspect.

Licence terms depend on the scanner package. Tell us the scanner you plan to buy and we will confirm what is included in your quote.

EXMeasure does not scan; it works on scan and CAD data. SHINING 3D does not publish a list of supported scanners or file formats on its page, so send us a sample file and we will confirm that it opens before you buy.

Get A Free Quote

Get Brochure Here